Worldwide shipping from Germany - free from 50€Remote control for Marantz CD-54
The remote module can be used with any handset for CD players (Grundig, Philips, Marantz ... RC5) or universal switches. The transmission is not only interference-free, it also offers a useful range of functions.
The special functions can also be controlled with number keys, as some handsets do not have corresponding keys: 1=Cancel, 2=Store/Preset, 3=Select, 4=Repeat, 5=USB/CD (optional)
CD 54 remote 48€buy
Installation example
From the fully assembled remote control board, the cables, which are plugged into the board with a connector, must be connected in the CD player. The circuit board is insulated with transparent plastic and can be easily inserted into the housing later.
Loosen the 6 screws on the front of the appliance and disconnect the two cables inside the appliance. Then remove the two plugged-in circuit boards to access the front circuit board.
The cables from the remote control module must be soldered according to their numbers as marked in the photo.
After soldering, only the infrared receiver needs to be attached close to an air gap - the easiest way is to attach it with a drop of hot glue. The part that is sensitive for reception is at the top of the rounding.
